Plasterboard Metal Corner Tape is a versatile and essential material for protecting both internal and external corners of drywall. This tape features a combination of paper joint tape and two corrosion-resistant metal strips, ensuring optimal durability and strength. It effectively protects corners of any degree, resulting in a planar, straight, and visually appealing finish. With its easy application, Plasterboard Metal Corner Tape is an excellent choice for safeguarding corners.
To further enhance the durability and strength of corners, you may also consider incorporating a metal corner strip and metal reinforced drywall tape. These additional components provide extra reinforcement, ensuring long-lasting and sturdy corners. By combining Plasterboard Metal Corner Tape with a metal corner strip and metal reinforced drywall tape, you can create a comprehensive solution for protecting and strengthening corners.

Plasterboard Metal Corner Tape
Material: galvanized steel or Aluminum
Size: 50mmx30m
With two reinforcing strips

Corner tapes are designed for use on internal and external angles, the tapes are applied using standard joint compound and are perforated to provide stronger joints.
Our drywall products have always led the way in providing innovative solutions to contractors and installers.
The tape is suitable for any degree of angle it helps straighten framing irregularities, resist's dents and cracking, is easy to cut and can be notched for use on curved joints such as archways and portholes.

High quality paper with two metal strip reinforce,apply good protect wall corner.
* Very high tensile strength.
* Steel with zincification or aluminium,rustiness resistant.
* Roll pack,easy to cut as requirement.
* Machine use available.

Plasterboard Metal Corner Tape Providing Innovative Solution

Plasterboard Metal Corner Tape How to use:
1. Cut flexible metal corner strip and Plasterboard Metal Corner Tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to achieve. Apply generous coat of joint compound to a depth of 1/8", covering both sides of the corner at the same time.
2. With the metal facing the wall, fold the metal corner strip and Plasterboard Metal Corner Tape at the center margin and press firmly into the compound.
3. Once the corner is embedded, remove excess compound with a taping knife.
4. After the first coat dries, sand lightly, apply a finish coat, and feather the edges two inches beyond the edges of the first coat.
5. If needed, apply a second coat 6"-10" wide on each side of the corner.
6. When dry, sand lightly if needed. The wide, galvanized steel strips act as a guide to ensure straight, reinforced angles for both "inside" and "outside" corner needs.