Metal Reinforced Corner Tape For Angles
- Price:Negotiable
- Description:Flexible Metal Corner Tape is ideal for different corners and angles which are 90 degrees to prevent corner not damage.
Specification:
The easy metal corner tape comes in consumer and contractor roll sizes varying in size from 30m(98.4') and 30.5m (100') rolls. Other length upon customers' request.
Packaging:
1pcs/box, 10boxes/carton ,then tray.
Metal Reinforced Corner Tape For Corners And Angles
High quality paper with two metal strip reinforce,apply good protect wall corner.
* Very high tensile strength.
* Steel with Galvanize steel or aluminum,rustiness resistant.
* Roll pack,easy to cut as requirement.
* Machine use available.
|
Metal strip
|
Roll size
|
Packing
|
Quantity 20GP
|
Quantity 40HQ
|
|
Galvanized
|
50mm x 30m
|
10 rolls/ctn
|
1200 ctns
|
2880 ctns
|
|
Aluminum
|
50mm x 30m
|
10 rolls/ctn
|
1200 ctns
|
2880 ctns
|
Metal Reinforced Corner Tape How to use:
1. Cut the flexible metal corner tape into strips using a knife. Make cuts at intervals depending on the desired radius. Apply a generous coat of joint compound, about 1/8" deep, to both sides of the corner simultaneously.
2. Fold the metal tape at the center margin and firmly press it into the compound, ensuring that the metal side is facing the wall.
3. Use a taping knife to remove any excess compound. Allow the first coat to dry, and then lightly sand it.
4. Apply a finish coat, feathering the edges two inches beyond the first coat. If necessary, apply a second coat, 6"-10" wide, on each side of the corner.
5. Once dry, lightly sand the area if needed. The galvanized steel strips on the metal corner tape provide reinforcement and ensure straight angles for both inside and outside corners.
