Corner tapes, such as drywall corners and flex metal tape, are essential components in creating strong and seamless joints for both internal and external angles. These tapes are applied using standard joint compound and are perforated to enhance the strength of the joints.
Our drywall products have always been at the forefront of innovation, providing contractors and installers with cutting-edge solutions. By incorporating drywall corners and flex metal tape, we ensure that our products deliver superior performance and durability.

Additionally, our Gypsum board corner metal tape is designed to accommodate any degree of angle. It not only helps straighten framing irregularities but also resists dents and cracking. This tape is easy to cut and can even be notched for use on curved joints, such as archways and portholes. By utilizing this versatile tape, contractors can achieve flawless results even in challenging areas.
In summary, incorporating drywall corners and flex metal tape, as well as Gypsum board corner metal tape, into your projects will ensure stronger joints, better alignment, and enhanced resistance to damage.

Material: galvanized steel or Aluminum

Size: 50mmx30m
With two reinforcing strips

Corner Tape Composition:
x Material body: kraft paper, zinc plated steel or aluminium coated strips.
x Roll length: 30m
x Paper width: 50mm

Gypsum Board Corner Metal Tape Used On External Angles

Gypsum board corner metal tape is ideal for use in a variety of drywall applications: internal or external corners which are 90 degrees or not 90 degrees, for manual application only.
Our  advantages:
1) professional mature production line
2) large production capacity.
3)Strict quality testing
4) factory price and best quality
5) fast delivery
6) high efficient after-sales service
7) emergency stockpile
8) we promise all of the queries and emails will get our reply within 24 hours.

Metal strip	Roll size	Packing	Quantity 20GP	Quantity 40HQ
Galvanized	50mm x 30m	10 rolls/ctn	1200 ctns	2880 ctns
Aluminum	50mm x 30m	10 rolls/ctn	1200 ctns	2880 ctns

Gypsum board corner metal tape How to use:
1. Cut flexible metal corner tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to achieve. Apply generous coat of joint compound to a depth of 1/8", covering both sides of the corner the same time. With the metal facing the wall, fold tape at the center margin and press firmly into the compound.
2. Once the corner is embedded, remove excess compound with taping knife. After the first coat dries, sand lightly, apply finish coat and feather edges two inches beyond edges of the first coat. If needed apply a second coat 6"- 10" wide on each side of corner. When dry, sand lightly if needed. The wide, galvanized steel strips act as a guide to ensure straight, reinforced angles for both "inside" and "outside" corner needs.